Optische Sicherheitsleitsysteme in unterschiedlichen Bereichen stellen höchste Ansprüche an Design und Funktionalität. Gleichzeitig erfordern die Beleuchtungsbedingungen vor Ort ein Nachleuchtprodukt, das in puncto Leuchtdichte und Aufladegeschwindigkeit überzeugt und die Vorgaben der Gesetzgebung (ASR, IMO, FAA) am Ort der Anwendung jederzeit erreicht. ASR A3.4/3: Die Leitmarkierungen von langnachleuchtenden Sicherheitsleitsystemen müssen eine Mindestbreite von 5 cm haben. Die Mindestbreite der Leitmarkierungen in Form von Streifen nachleuchtender Systeme kann bis auf 2,5 cm verringert werden, wenn die Leuchtdichte nach 10 min. nicht weniger als 100 mcd/m2 und nach 60 min. nicht weniger als 15 mcd/m2 beträgt. Bei den Leitstreifen ist eine Wandmontage bis 40 cm über dem Boden möglich. Auch in C-Qualität erhältlich. Montage zum Verkleben und Verschrauben. Die Leitmarkierungen von langnachleuchtenden Sicherheitsleitsystemen müssen eine Mindestbreite von 5 cm haben. Die Mindestbreite von Streifen kann bis auf 2,5 cm verringert werden, wenn die Leuchtdichte folgende Werte erreicht: nach 10 min. nicht weniger als 100 mcd/m2, nach 60 min. nicht weniger als 15 mcd/m2. Leitmarkierungen auf dem Boden, z.B. mit EverGlow® Ronden oder Fußabdrücken werden als durchgehend angesehen, wenn mindestens drei Markierungen pro Meter in regelmäßigen Abständen angebracht sind. Die Markierungen müssen mind. einen Durchmesser oder eine Kantenlänge von 5 cm haben Bei den Leitstreifen ist eine Wandmontage bis 40 cm über dem Boden möglich. Auch in C-Qualität erhältlich. Montage zum Verkleben und Verschrauben. Die Leitmarkierungen von langnachleuchtenden Sicherheitsleitsystemen müssen eine Mindestbreite von 5 cm haben. Die Mindestbreite von Streifen kann bis auf 2,5 cm verringert werden, wenn die Leuchtdichte folgende Werte erreicht: nach 10 min. nicht weniger als 100 mcd/m2, nach 60 min. nicht weniger als 15 mcd/m2.
3M VHB 4952FBlanks 100 x 4.5 cmextremely adhesive DKBfor profile mounting At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8. EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Rolls with photoluminescent coating Self-adhesive film in acrylate composite HI 150; with surface laminate, walkable 5.0 x 2500.0 cm self-adhesive full-surface photoluminescentAt EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Film in acrylate composite Ideally suited for permanent marking. Photoluminescent, cannot be walked on. Cannot be removed without tearing. At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Film in acrylate composite laminated on magnetic carrier 2.5cm x 5m HI 150At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guideline
Push” sticker, one-sided PVC film, self-adhesive green, text/arrow photoluminescent EverGlow HI 150 10.0 cm diameter At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Pull” sticker, one-sided PVC film, self-adhesive red, text/arrow photoluminescent EverGlow HI 150 10.0 cm diameter At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Sticker “Pull/Drcken” double-sided PVC film, self-adhesive red, green, text/arrow photoluminescent EverGlow HI 150 10.0 cm diameter At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Floor marking semicircle photoluminescent (EverGlow HI 150)750 x 350 mm semicircle red / EverGlow HI 150Pictogram fire extinguisher ASR A1.3 F001PVC film 0.15 mm self-adhesive and non-slipEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Floor marking with anti-slip coating - waiting area Please keep a distance of at least 1.5 meters! 64.0 x 8.0 cm PVC film At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Floor marking with anti-slip coating - waiting area (round) Please keep a distance of at least 1.5 m! Diameter 24.0 cm PVC filmAt EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Tilt dowel for fastening to gratings Length 70 mm Phillips screw M5 x 80 H Price per PU 1 PU = 25 piecesEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Door lock surround 200mcd/m 1VE = 3 pcs. At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Aluronden 1,5 mm mit Pfeil inkl. Lochung, Durchm. 10,0 cm DIN 67510 Alu HI 300 1VE = 10 St.mit Glasperlen
According to ASR A3.4/3, the door handle must be designed to be photoluminescent or the area of the door handle must be backed with photoluminescent material. Escape routes must be edged with photoluminescent materials. At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Door marking tape, photoluminescent/white, self-adhesive At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
According to ASR A3.4/3, the area of the door handles must be backlit with photoluminescent material. Escape doors must be edged with photoluminescent materials. Door marking strips made of aluminum in Hi 150 or HI 300At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Blank for floor marking with and without arrowgreen/glow-in-the-dark or full-surface glow-in-the-dark with glass bead paint, anti-slip5.0 cm, 9.5 cm or 12.5 cm diameter0.2 mm aluminum, robust and durableself-adhesive, 3M adhesive particularly strong adhesionhotoluminescent HI 300Guidance markings for directing the flow of people, schoolchildren and public trafficEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Star 1 guide strips with two green arrowswith slotted holes and round holes for mounting on gratings, with glass bead lacquer sealing, anti-slipEasy and safe installation, even outdoorsAluminum 1.5 mmphotoluminescent, HI150, class CStaircase and guidance markings, for marking escape and rescue routesEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Footprint, photoluminescent with anti-slip effect, self-adhesive 21.0 x 8.5 cm Alu HI 300 EverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Floor marking semicircle Photoluminescent (EverGlow HI 150)750 x 350 mm semicirclegreen/ EverGlow HI 150Pictogram escape route ASR A1.3 E001PVC film 0.15 mm self-adhesive and slip-resistantEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Base nail round 110 mm diameter, height 11 mm loadable up to 10 t class E Luminance at full charge 1400 mcd/m or base nail square 100 x 100 mm, height 11.2 mm loadable up to 10 t class E Luminance at full charge 1400 mcd/m At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Lumipro U-profile aluminum 1.0 x 0.6 x 100cm 450mcd/mAt EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability.EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings.EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.
Marking strips /directional arrow photoluminescent/green Alu HI 150 self-adhesive At EverGlow® you can obtain: escape signage, fire safety signage, stair markings, door markings, floor markings, colour systems, coating systems and pigments in photoluminescent quality. Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with ASR A1.3, DIN ISO 7010 and BGV A8.EverGlow® products have an above-average luminance that always exceeds the legal standards.Thanks to the 3M adhesive we use, all our products have high adhesion and durability.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours. We do everything we can to impress our customers with innovative products for photoluminescent safety labelling with the highest performance standards, above-average luminance and high durability. EverGlow® is the leading manufacturer of photoluminescent escape and rescue route markings. EverGlow® was also the first manufacturer in Germany to produce signs in its catalogue range using the screen printing process. From the very beginning, we have focused solely on high luminance and aluminium as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes. Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines
Star 1 guide stripswith slotted holes and round holes for mounting on gratings, with glass bead lacquer sealing, anti-slipEasy and safe installation, even outdoorsAluminum 1.5 mmfully photoluminescent, HI150, class CStaircase and guidance markings, for marking escape and rescue routesEverGlow® provides you with: escape route marking, fire protection marking, stair marking, door marking, floor marking, color systems, coating systems and pigments of the highest photoluminescent quality.Our production is DIN EN ISO 9001 and DIN ISO 14001 certified. We have MED approval for maritime equipment. Our products comply with the standards DIN ISO 16069, DIN ISO 7010, ISO 3864, ISO 15370, ISO 17398, DIN 67510 as well as the legal requirements of ASR A1.3, ASR A 2.3 and BGV A8 (withdrawn).EverGlow® products have an above-average luminance that always exceeds the legal requirements.Thanks to high-quality adhesives (e.g. 3M), all our self-adhesive products have strong adhesion.With absolute saturation, the decay time according to DIN 67510 is at least 35 hours.We do everything we can to impress our customers with innovative products for photoluminescent safety signage with the highest performance standards, above-average luminance and high durability.EverGlow® is one of the pioneers in the field of photoluminescent safety guidance systems and is now one of the leading manufacturers.EverGlow® was also the first manufacturer in Germany to produce signs in its catalog range using the screen printing process. From the very beginning, we have focused on high luminance and aluminum as a material. Even today, EverGlow® has one of the most extensive product portfolios with a luminance of at least 150 mcd/m² after 10 minutes.Our products are constantly being further developed and impress with their above-average light duration and compliance with environmentally friendly guidelines.